Special Astronomy Kit
ASTRO-10 (XT) Laser, Cable Switch, Telescope Mount
ASTRO-10 (XT) Extreme Temperature 14° ~ 122°F (-10 ~ 50° C)
The Z-Bolt® ASTRO-10 (XT) astronomy green laser pointer is constructed of high quality anodized aluminum. This model includes new 515nm semiconductor laser technology! No IR Light Filter required. The XT version of the ASTRO-10 laser operates at extreme temperature ranges, 14° ~ 122°. Ships in a satin lined carry & gift case; 2 pcs CR123A batteries; nylon belt carry pouch included. Redesigned constant on/off click switch; telescope mountable; visible beam & five (5) mile range (at night). Lithium battery powered for superior cold weather operation.
Z-Bolt® Certified Power Output Certificates . . .
The ASTRO-10 (XT) features guaranteed Z-Bolt® Certified Power for the brightest possible daylight dot; most visible nighttime beam. Each Z-Bolt® Certified Power green laser pointer is factory tuned & calibrated, then tested & certified on a laser power meter - all tested units ship with a Laser Power Output Certificate. Only premium Z-Bolt® Certified lasers are rated at 4.0 to 5.0 mW power output and are 2 to 3 times brighter than standard Class IIIa units.
Astro-1, Anodized Aluminum
The ASTRO-1 features a quick-release laser bracket for transportation and storage. The bracket also includes a precision T-style dovetail that maintains alignment when re-attached. Made from solid aircraft grade aluminum, the ASTRO-1 is engineered for a lifetime of use. Holds lasers up to 23mm OD; weighs 5oz. Astronomy Laser Bracket ships with your choice of three (3) mounting base plates:
Reflector Telescopes
Wide 2.35" Base. With a radius-cut of 9.25", the base mounts snugly to virtually any reflector. Pre-existing holes with center-to-center spacing of 1.0" to 2.1" may be used to mount the base using two (2) screws; or four (4) screws with 1.75" center-to-center spacing may be used. Mounting hardware (8-32 screws/nuts) included.
Refractor Telescopes
Features a smaller base to take up less space on your refractor. With a radius-cut of 1.75", the base fits snugly on most refractors, and is mounted with industrial-strength double-sided tape, included. Base is 1.12" wide at the bottom; 0.88" wide at top and 1.5" long. Height to ring-top is 2.6".
Tripod Base Plate
Mount your Laser Bracket to any camera tripod with standard 1/4-20 threads.
RSA-10 Cable Switches [Choose 6", 15", 30"]
Remote cable switch to activate green laser pointer without touching telescope when aligned as a star finder. Prevents unwanted movements that affect delicate finder alignments. For use with green lasers in finder mounts and alignment setups. Designed for the outdoors; rugged and reliable; dirt and moisture resistant. Cable switch can be "velcro" attached to telescope body; or allowed to dangle freely.
ASTRO-10 (XT) Laser Specifications
- Length 4.65 in. x Diameter 0.75 in. ( 118 mm x 19 mm )
- IR Filter? Not Required on Semiconductor XT Diodes
- Diode Circuit Type - OSRAM Semiconductor 515nm
- Wavelength (Color) - 515 nm (Emerald Green)
- Output Power - Z-Bolt® Certified 4.0~5.0 mW
- Diode Operating Life - 3,000 to 5,000 hours
- Extreme Temp Operation - 14° ~ 122°F
- Beam Diameter at Source - 1.1 mm
- Output Mode - Constant Wave
- Range ( Night ) - 5 Miles
- FDA Safety Class - IIIa
- ANSI Safety Class - 3R
- Warranty - 2 Years